This is an archived forum community. It's currently closed to new memberships.
ElantraClub - for all generations

Welcome Guest ( Log In | Register )

Recent edits
Shark Racing Cr... by elantragt
  Dec 25 2016, 09:01 PM
Audio Buying ti... by elantragt
  Dec 23 2016, 03:16 PM
Basic cleaning ... by elantragt
  Dec 22 2016, 12:05 PM
Adding LED'... by elantragt
  Dec 22 2016, 11:57 AM
Solid Motor Mou... by elantragt
  Dec 22 2016, 11:46 AM
Body color head... by elantragt
  Dec 22 2016, 11:41 AM

Our members have created a total of 137 articles in 13 categories.

A total of 602 edits have been made and our articles have been viewed 1,867,961 times

> Aftermarket Pioneer stereo with steering-wheel controls
Options V
Here's how I hooked up the PAC SWI-PS to a Pioneer AVIC-F700BT, in a 2009 Elantra GT Sport (Canadian):

In the green harness pictured below (hyundai connector # M54-D), pins 5 and 6 are the ones used for the steering wheel interface (which is a resistor network, schematic here: used. Pin 6 (black) needs to be connected to ground, and Pin 5 (Green) should go to the white wire on the PAC SWI-PS.

The red and black wires (power) of the SWI-PS should be hooked up to accessory power and ground, respectively, and no other wires are used. Do not cut either of the loop wires on the SWI-PS.

The SWI-PS should be programmed for mode 8, and otherwise just follow the programming instructions that come with it.

Last update: Apr 17 2009, 05:22 PM by gregmac    Created: Apr 17 2009, 05:21 PM by gregmac    Edits: 2    Views: 2,467
Print article  Download MSWord version  Download txt version
Visit this article's discussion topic

Copyright 2022 The Elantra Club    
Time is now: 14th June 2024 - 12:08 AM
Elantra Club is not affiliated in any way with Hyundai Motor America