ElantraClub will officially be closing in mid-October 2024. Thank you to all the members and moderators who have helped make this place great. It was a good run.

Thank you for everything. - Mitch
ElantraClub - for all generations

Welcome Guest ( Log In | Register )


Recent edits
Shark Racing Cr... by elantragt
  Dec 25 2016, 09:01 PM
Audio Buying ti... by elantragt
  Dec 23 2016, 03:16 PM
Basic cleaning ... by elantragt
  Dec 22 2016, 12:05 PM
Adding LED'... by elantragt
  Dec 22 2016, 11:57 AM
Solid Motor Mou... by elantragt
  Dec 22 2016, 11:46 AM
Body color head... by elantragt
  Dec 22 2016, 11:41 AM

Stats
Our members have created a total of 137 articles in 13 categories.

A total of 602 edits have been made and our articles have been viewed 2,286,037 times

> (MD/UD) Swapping out the Auto Shift Knob , by PartsGuyNick
Options V
I swapped out my stock plastic shift knob for the leather wrapped one out of the Limited. It wasn't too difficult, but it did take us (a tech and I) a second to figure out the trick. I wish I would have taken pics while we were actually doing to install but I didn't think about that untill I got home. So, just pretend that my desk is the interior of a 2012 Elantra and lets get on with it smile.gif

Ok, so here is the el cheapo plastic shift knob that comes stock on all new Elantras up to the Limited.


To remove it, you have to first separate the chrome trim from the rest of the knob. Either squeeze it on the left and right sides and pull down really hard or you can use a really thin flat head screwdriver like i did to pry it off.


Good job! That was the hardest part. Now from the driver's side you'll see a tiny little "C" clip in there.


Just use your little flat head screwdriver to slide it out towards you.


Finally just firmly pull up on the knob to remove it. Repeat the process on your new knob to prepare it (just look at those pictures up there again if you forgot) Push the new knob on until you hear a click, reinsert the "C" clip, and snap the chrome trim into place. You're done. Congratulations, you now have a shift knob that matches the rest of your console!

(Made of the finest Corinthian Leather)


Hope this helps someone! Now I just need to find a leather steering wheel that costs less than $800 to finish up that project.

Oh, almost forgot to give you the part number (sorry, I went a little crazy with the pictures)

Last update: Jul 27 2011, 08:35 PM by elantragt    Created: Jul 27 2011, 08:21 PM by elantragt    Edits: 2    Views: 13,402
Print article  Download MSWord version  Download txt version
Visit this article's discussion topic

Copyright 2022 The Elantra Club    
Time is now: 5th October 2024 - 01:32 PM
Elantra Club is not affiliated in any way with Hyundai Motor America