What I did was I first removed the plastic cover that spans the gap between the grille and the radiator. It's held down with those quick rivets (that what they are?) so you need a phillips head screwdriver if you can't pop them out by hand. Depending on how large of a person you are you will be able to reach through the gap to do the zip-tying.
All I did was wrap one ziptie around the bumper (the actual metal bar and not the plastic bumper you traditionally think of as the bumper) to act as an anchor and then used another ziptie to go from the mesh to the anchor.
Basically there weren't any anchor points so I made one.
Oh and having removed my grille to trade it with CleanElantra I noticed that it would be a LOT easier to mesh the dam without the grille in place. It's not necessary but it would help.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)