This is an archived forum community. It's currently closed to new memberships.
ElantraClub - for all generations

Welcome Guest ( Log In | Register )


Recent edits
Shark Racing Cr... by elantragt
  Dec 25 2016, 09:01 PM
Audio Buying ti... by elantragt
  Dec 23 2016, 03:16 PM
Basic cleaning ... by elantragt
  Dec 22 2016, 12:05 PM
Adding LED'... by elantragt
  Dec 22 2016, 11:57 AM
Solid Motor Mou... by elantragt
  Dec 22 2016, 11:46 AM
Body color head... by elantragt
  Dec 22 2016, 11:41 AM

Stats
Our members have created a total of 137 articles in 13 categories.

A total of 602 edits have been made and our articles have been viewed 1,692,854 times

> MD/UD Radio (non-Navi) Setup Menus , Menus for setup functions, technical info, etc.
Options V
The GLS radio has some "hidden" menus for viewing information about the radio, upgrading firmware, and options for administrative setup. These are not user-oriented options, so if you're simply looking to tweak radio options, this probably isn't going to have what you're looking for. However, you might play around with it and find something interesting.

Accessing the Menu

1. Turn the car on (just acc power is enough)
2. Turn the radio ON, then turn it OFF.
3. Press and hold the "1" preset button then, w continuing to hold "1", press "4", then release both.
4. Very quickly press "1" four (4) times. If you wait more than a second or two, it won't work and you'll have to start again.

You will be presented with a basic info screen.



Note: If you follow this same procedure with the "1" and "6" buttons, you will get the I think if you do the same thing with the "1" and "6" buttons, you get an information-only screen (menus are not available).

Also note that at either basic info screen, you can press the Info button to see more detailed information.



The Sub-Menus

At this point, you use the preset number buttons to select a sub-menu as shown in the picture below. Once you've selected a sub-menu, you use the Tune up (^) and down buttons to select options. For most options, pressing enter will change the value for the option selected, but on the region menu, "Enter" selects and saves the region currently displayed.

Note also that you can't really "navigate" the menus. Once you select 1, 2, 3, etc., you're stuck there until you change/enter an option or turn the radio on, then off again and start over. In other words, you can't "go back".

Also note that after you've displayed this, you will most often have to turn the radio on/off twice to get it back to the point where you can start over successfully.

1 - USB Firmware Update (Self Explanatory)

2 - CD Firmware Update (Self Explanatory)

3 - GUI, Firmware Memory Copy (?) and XM DM Mode (?) - Not sure what the GUI ON/OFF item is for. EEP -> NOR and vice versa are most likely to copy firmware from either flash (NOR) to EEPROM (EEP) to the other in case one of them is corrupted. Also not sure what XM DM Mode is.

4 - Radio Level Monitor - Perhaps turns off monitoring of speed for automatic volume? Not sure why since this can be controlled in the user interface.

5 - RF & BT Test and BT Firmware Update - Tests and an option to update the Bluetooth firmware.

6 - Country and Model - You can from a number of geographic areas. In mine, only the US, Canada and Guam were availabie. In other markets, other countries are available. For each country, there is an option with or without bluetooth and other things (going by memory).


Last update: Oct 12 2011, 06:34 PM by benman    Created: Oct 12 2011, 06:34 PM by benman    Edits: 1    Views: 9,754
Print article  Download MSWord version  Download txt version
Visit this article's discussion topic

Copyright 2022 The Elantra Club    
Time is now: 29th March 2024 - 01:15 AM
Elantra Club is not affiliated in any way with Hyundai Motor America