Printable Version of Topic

Posted by: bhorste Jun 3 2017, 10:21 PM

Okay, if we're going to make this crazy pipe-dream a reality, I'm going to need a little assistance in the form of information. Things like:

# of units produced in 2003
Rev limit method (pretty sure it reds out at 6500 and it's fuel cutoff, but would like verification)
Minimum block deck height and clearance
Combustion chamber and head chamber volume
Port volume on both intake and exhaust
Crossflow head?
Port dimensions at manifold faces
Valve head diameters and materials
Piston type and mass (I think they're dished with a relief cut into the exhaust side, but could be talking out my ass)
Con rod length, material and mass
Total piston, ring, wrist pin and con rod mass
Crankshaft mass
Camshaft base circles, durations and centerlines for both intake and exhaust
Valve lift on both sides
Flywheel mass
Stock Cg
Official designation for the rear suspension (independent multi-link?)
Spring widths/diameters/rates/free lengths front and rear
Damper dimensions front and rear, to include:



All these dimensions, front and rear

And more... stay tuned and feel free to chime in if you know any of this info. The sooner I can get this form completed, the sooner the project progresses!