This is an archived forum community. It's currently closed to new memberships.
ElantraClub - for all generations

Welcome Guest ( Log In | Register )

Recent edits
Shark Racing Cr... by elantragt
  Dec 25 2016, 09:01 PM
Audio Buying ti... by elantragt
  Dec 23 2016, 03:16 PM
Basic cleaning ... by elantragt
  Dec 22 2016, 12:05 PM
Adding LED'... by elantragt
  Dec 22 2016, 11:57 AM
Solid Motor Mou... by elantragt
  Dec 22 2016, 11:46 AM
Body color head... by elantragt
  Dec 22 2016, 11:41 AM

Our members have created a total of 137 articles in 13 categories.

A total of 602 edits have been made and our articles have been viewed 1,805,224 times

> Adding a cargo net to the MD/UD , by flyswatter
Options V
I'm happy to report that no drilling is required! Behind the panel fasteners, is a hole that the T-Anchors can self tap into. The top holes on both sides were very tight, and I had to use a pair of pliers at one point on each side to get enough leverage to get the anchors in all the way. (I covered the plastic T-Anchor with a towel to avoid marring the finish.)

Briefly, here's the process.

Assemble the T-Anchors

Locate the panel fasteners on the top and bottom on each side, and remove. I ended up going to Harbor Freight and buying a cheap removal tool. The top ones were a bit of a bitch. The bottom ones the plastic sill were much easier to remove. Screw the T-Anchors in nice and tight. As I said, I had to use a pair of pliers on the tops ones.

Attach the cargo net and you're done

Last update: May 14 2011, 01:15 PM by elantragt    Created: May 14 2011, 01:11 PM by elantragt    Edits: 3    Views: 4,783
Print article  Download MSWord version  Download txt version
Visit this article's discussion topic

Copyright 2022 The Elantra Club    
Time is now: 18th May 2024 - 08:20 PM
Elantra Club is not affiliated in any way with Hyundai Motor America