Hyundai Kenwood parts/accessories, dealer-available part #'s (XD/XD2) Options

[Alex2013GT]

single and double din installation kits are available for the NF

I put AVN30-D and Kenwood navigation flipouts in them all the time.


-shawn

If and when I am able to replace my stock unit. . . I'll be sure to speak to you for some advice and depending on price some parts . ..

[Doohickie]

This comes up from time to time: Use this link to download the Instruction Manual for the Kenwood model KDC-MPV622 for the 2004 GT.

[CyberGecco]

Kenwood iPod controller for Kenwood decks:

[CyberGecco]

Note to all: HMA has been raising pricing on most every part due to inflation, over the past few months, almost every month. Pricing stated is relevant to the time posted, no guarantees are made after approximately one month has passed. Sorry bout that!

[Vampyrate]

gawd, if it all didnt cost so much, i would just upgrade to that right now!

[citking]

If you do a Froogle search for Kenwood iPod Interface you can find them for a lot cheaper. Go to froogle.google.com and search.

If you want more detailed specs straight from Kenwood check out http://www.kenwoodusa.com/products/ListPro...9&k3=58&pr=1847

EDIT: Just realized Kenwood doesn't give you much info. Check out http://www.cardomain.com/item/KENKCAIP500 for better info and reviews.

This post has been edited by citking: Apr 17 2006, 02:01 PM

[Doohickie]

This comes up from time to time:  Use this link to download the for the Kenwood model KDC-MPV622 for the 2004 GT.

<a href="index.php?act=findpost&pid=83135"><{POST_SNAPBACK}>

Apparently Kenwood reorganized their website and the link to the owners manual changed. Here is a link to the new location of the Owners Manual</a>.

[NY2002ElantraGT]

whats the kenwood model #? not the hyundai part #... but if i were to look on ebay for the front speakers would i find anything? or do i have to go through hyundai? i would like the direct plugin.... if not i'll look for something else

[Doohickie]

whats the kenwood model #?   not the hyundai part #... but if i were to look on ebay for the front speakers would i find anything?  or do i have to go through hyundai?  i would like the direct plugin.... if not i'll look for something else

If you're talkin' the part number for the Kenwood head unit, read the quote part of the post above yours!

This post has been edited by Doohickie: May 22 2006, 10:07 PM

[NY2002ElantraGT]

Im talking about the front speakers..... sorry i should have clarified that. im looking for the model# from kenwood on the speakers that would be a direct plug in. i saw a thread a while back that someone upgraded their speakers and just pluged in. cuz i bought a pair of speakers but the mounting holes didnt fit. if anyone has upgraded thier speakers let me know what kind and model #. thanks

[CyberGecco]

Sorry for getting back to you so late. I don't think tt the hyundai kenwood speakers are sill available through the audio retail business...they were KFC-1369ie speakers, I do believe.

Noted difference between the silver and blackfaced kenwood units: Blackface and silver both have two sets of rca preouts, but only the black has the option of making the rear outs non-fading, and has built-oin dubwoofer volume control through these nonfading rear outs.

[Doohickie]

Since this comes up occasionally, I thought I would consolidate some posts from another thread in terms of trimming out aftermarket head units. Since a couple of the options are to use the Hyundai Kenwood mounting parts, this seems to be the best place for the information:

The opening in the dash fascia may be too small to include the bezel that comes with your aftermarket unit, but large enough to leave a gap around the detachable faceplate. There are several options here:

1. If you don't worry about the untrimmed area, it will look like jrod13's:



2. Trim out the unfinished area. I had some foam tape that was about 1/16" thick which I put on the perimeter of the head unit *before* putting the fascia and faceplate on. The foam was pressed under the fascia at the outer edge and when I put the head unit face on, it compressed the foam slightly on the inner perimeter. When I had it this way, it looked like the following picture. Other things besides foam could be used including electrical tape, black construction paper or cardboard.



3. Buy the 00271-84004 OEM unit (about $40 at a dealer or online). My Pioneer unit fit perfectly except that there are small tabs that stick out of the unit (I think for security purposes) that I bent over... then it fit perfectly. It looks like this:



4. There is a more affordable OEM option that trims out the area but omits the door- it's part number 00273-83000. More information about these kits can be found in this thread. The doorless kit looks like CyberGecco's when it's installed:



Note: This post was largely copied from posts I made in this thread.