This is an archived forum community. It's currently closed to new memberships and is read-only.
ElantraClub - for all generations

Welcome Guest ( Log In | Register )

Amazon · Advance Auto · Newegg · Ebay 

Recent edits
Shark Racing Cr... by elantragt
  Dec 25 2016, 09:01 PM
Audio Buying ti... by elantragt
  Dec 23 2016, 03:16 PM
Basic cleaning ... by elantragt
  Dec 22 2016, 12:05 PM
Adding LED'... by elantragt
  Dec 22 2016, 11:57 AM
Solid Motor Mou... by elantragt
  Dec 22 2016, 11:46 AM
Body color head... by elantragt
  Dec 22 2016, 11:41 AM

Our members have created a total of 138 articles in 13 categories.

A total of 602 edits have been made and our articles have been viewed 1,337,165 times

> J2/RD Front Sway Bar Bushing Replacement by , 2000J25SP
Options V
For 1996-2000 Elantra, 1997-2001 Tiburon.

Start by Jacking the car up and removing the front tire.

The endlink has to come off of the sway bar. Otherwise you will won't have enough clearance when installing the new bushing.

To remove the endlink, use two 14mm wrenches.

Now remove the two 14mm bolts from the sway bar bracket. Remove the upper and lower bracket. pull the bushing off the bar.

New Bushing on the right.

Install the new bushing. Make sure the tabs on the bushing go in the holes on the bracket.

Repeat on the other side.

Last update: Jul 23 2013, 06:52 PM by elantragt    Created: Jul 23 2013, 06:51 PM by elantragt    Edits: 2    Views: 4,271
Print article  Download MSWord version  Download txt version
Visit this article's discussion topic

RSS 2017 The Hyundai Elantra Club    
Time is now: 21st October 2021 - 12:13 AM
Elantra Club is not affiliated in any way with Hyundai Motor America